ROV umbilical winch c/w integrated HPU, sliprings and umbilical.

Workclass ROV umbilical winch c/w sliprings and drum capacity of 2830m of 34mm umbilical.

4T SWL AHC electric winch fitted with 25.28mm umbilical and sliprings.

RAPP AHC winch which comes complete with sliprings and a length of 25.28mm steel armoured umbilical.

Electric AHC ROV umbilical winch c/w with umbilical and sliprings.  Designed to take 3150m of 25.28mm umbilical.

AHC umbilical winch and HPU.  Drum capacity is 3300m of 34.4mm diameter umbilical.

Hand winch c/w sliprings, previously used with a Falcon ROV system.  The winch can be purchased on its own or there are various lengths of Falcon umbilical available.  Both the sliprings and umbilical's are copper only.

Small ROV winch previously used with a Stingray ROV system.  The winch is fitted with 120m of umbilical consisting of:

• (2) 75-ohm, 22 AWG coax

• (4) 18 AWG power conductors

• (2) 26 AWG twisted shielded pairs

2 x cursor winches manufactured by Dynacon.

Unused TMA 5T SWL hydraulic man-riding winch.

Free swimming WROV winch with integrated HPU.  Winch comes with sliprings and a 500m length of Super Scorpio 8.2 umbilical.

This winch is designed to spooling light weight wire rope, umbilical or Dyneema rope. It is supplied with a HPU and is fitted with a disk and pin brake.  Typical applications include light weight subsea geotechnical work and yard spooling. It has an in date load test for the frame. The motor and brake pack have been recently overhauled March 2026.